Aftershave balm is a modern, nourishing twist to the traditional aftershave routine. Their primary purpose is to hydrate and soothe the skin after shaving, helping to reduce irritation and leaving the skin feeling soft and smooth. With their moisturizing benefits, aftershave balms provide a comforting end to any shave.
1. Dispense aftershave balm: Squeeze a small amount of aftershave balm moisturizer (about the size of a dime) into your palm. You can adjust the amount depending on your skin's needs.
2. Warm the balm: Rub your hands together to warm up the aftershave balm and help it spread more easily.
3. Apply the balm: Gently massage the aftershave balm all over your face, taking extra care to cover all the skin that came into contact with the razor. Use gentle, circular motions to help the balm absorb into your skin.
By following these steps, you can effectively apply an aftershave balm moisturizer after using an aftershave splash to further nourish, hydrate, and soothe your freshly shaved skin.
We are always hearing about new and unique ways our customers are using their WSP products to work for them! In this section we will regularly update with new ideas, tips, tricks and hacks that we come across.
If you have a unique way that you use shaving cream email or message us on any of our social media platforms and we will add it to the list with a shout out!
]]>Preparation is key in shaving, and one product that truly stands out in this regard is shaving oil. This nourishing product, which became popular in the 20th century, is designed to soften the hair and create a smooth surface on the skin for a closer, more comfortable shave. By providing a protective layer, it reduces the risk of nicks, cuts, and razor burn and enhances the overall quality and comfort of your shave.
1. Cleanse your face: Start by washing your face with a gentle cleanser and warm water to remove any dirt, oil, or debris. This will ensure that the pre-shave oil can work effectively on your skin. Warm water on your face will open up the pores and further soften your facial hair. This will help the pre-shave oil absorb better and prepare your skin for shaving.
2. Dispense pre-shave oil: Pour a small amount of pre-shave oil (about the size of a dime) into your palm.
3. Warm the oil: Rub your hands together to warm up the oil, which will help it spread more easily and absorb better into your skin.
4. Apply the oil: Gently massage the pre-shave oil onto your face, covering the entire area you plan to shave. Make sure to work the oil into your beard or stubble, so it reaches the skin underneath.
5. Let it absorb: Allow the pre-shave oil to absorb into your skin for at least 30 seconds to a minute. This will ensure that it has time to soften your facial hair and create a protective barrier.
6. Apply shaving cream or soap: After the pre-shave oil has been absorbed, apply your shaving cream or soap. You can use a lather brush or your hands, depending on your preference.
7. Shave: Proceed with shaving as you normally would, using a clean, sharp razor. The pre-shave oil should help to provide a smoother, more comfortable shave.
8. Rinse and moisturize: After shaving, rinse your face with cool water and gently pat it dry. Apply an alcohol-free aftershave splash or aftershave balm to soothe and hydrate your skin. The shave oil can also be used post-shave to add more moisture underneath your aftershave balm if you have particularly dry skin or live in a dry climate.
By incorporating pre-shave oil into your routine, you can enhance your overall shaving experience and reduce the risk of irritation, razor burn, or ingrown hairs.
We are always hearing about new and unique ways our customers are using their WSP products to work for them! In this section we will regularly update with new ideas, tips, tricks and hacks that we come across.
If you have a different way that you use shave oil, email or message us on any of our social media platforms and we will add it to the list with a shout out!
]]>Aftershave splash is a classic finish to a traditional shaving routine. Popularized in the 20th century, this refreshing product serves multiple purposes: it soothes the skin post-shave, helps to prevent infection from any minor cuts, and leaves a pleasing fragrance. Made typically from a combination of antiseptic ingredients, essential oils, and alcohol, it's applied to the face immediately after shaving to provide a pleasant cooling and tightening sensation.
1. Rinse your face: After shaving rinse your face thoroughly with cool water to remove any remaining shaving cream or soap. Cool water helps to close the pores and soothe the skin after shaving.
2. Pat your face dry: Gently pat your face dry with a clean towel. Avoid rubbing, as this can cause irritation, especially on freshly shaved skin.
3. Shake the bottle: Shake your aftershave splash bottle well to ensure that the ingredients are mixed properly.
4. Pour aftershave into your palm: Carefully pour a small amount of aftershave splash into your palm. Start with a small amount, as you can always add more if needed.
5. Rub your hands together: Rub your hands together to spread the aftershave evenly on your palms and warm it slightly.
6. Apply the aftershave splash: Gently pat the aftershave onto your freshly shaved areas, making sure to cover all the skin that came into contact with the razor. Avoid rubbing, as this can cause irritation.
7. Let the aftershave dry: Allow the aftershave splash to air-dry on your face. This usually takes only a few moments. As the aftershave dries, it will help to tone and tighten your skin, as well as provide a cooling and soothing sensation.
8. Apply moisturizer: Gently apply aftershave balm all over the face to hydrate your skin and maintain its natural moisture balance. If you find that you have very dry skin or live in a dry climate you can apply shave oil to the freshly shaved areas first, let it absorb for a few moments then apply the aftershave balm as instructed.
By following these steps, you can effectively apply an aftershave splash after shaving to help soothe, tone, and refresh your skin.
We are always hearing about new and unique ways our customers are using their WSP products to work from them! In this section we will regularly update with new ideas, tips, tricks and hacks that we come across.
If you have a unique way that you use shaving cream email or message us on any of our social media platforms and we will add it to the list with a shout out!
]]>Shaving cream has been a staple in men's grooming routines for decades, loved for its rich, creamy lather that ensures a close, comfortable shave. Originating in the early 20th century as a convenient and effective alternative to traditional shave soap, this product quickly gained popularity. Shaving cream not only prepares the skin and hair for shaving but also provides a layer of protection, minimizing the risk of nicks, cuts, and irritation. Follow the steps outlined below to achieve a smooth and comfortable shave!
1. Prepare your face: Before you begin, wash your face with warm water and face soap to remove dirt and oil build up, and open the pores. To soften the hair and protect the skin apply a pre-shave oil. These first steps will ensure a smoother, more comfortable shave.
2. Scoop out shave cream: Using your hands or a small spatula scoop out a small amount of shave cream (about the size of coin) into your palm. This amount may vary depending on your beard growth and the thickness of the cream.
3. Lather in your hands: Use your hands to create a lather by rubbing the shave cream between your palms. This might take a few seconds to a minute, depending on the shave cream's consistency. You can add a few drops of water to help create a richer lather.
4. Apply to your face: Once you have a good lather, use your hands to apply the shave cream to your face. Spread it evenly and cover the entire area you want to shave, making sure to massage the lather into your beard or stubble. This will help lift the hairs and create a protective barrier between your skin and the razor blade.
5. Shave: Begin shaving with a clean, sharp razor. Shave in the direction of hair growth to reduce the risk of irritation, razor burn, or ingrown hairs. Rinse the razor frequently to remove any hair or cream buildup.
6. Rinse your face: After you've finished shaving, rinse your face thoroughly with cool water. This will help to remove any remaining shave cream and soothe your skin.
7. Pat dry: Gently pat your face dry with a clean towel. Avoid rubbing as this can cause irritation.
8. Apply aftershave or moisturizer: Finish by applying an aftershave splash or aftershave balm to soothe and hydrate your skin.
By following these steps, you can effectively use shave cream without a lather brush for a smooth, comfortable shave. If you wish to lather using a brush follow the same steps of how to use a shaving soap.
We are always hearing about new and unique ways our customers are using their WSP products to work from them! In this section we will regularly update with new ideas, tips, tricks and hacks that we come across.
If you have a unique way that you use shaving cream email or message us on any of our social media platforms and we will add it to the list with a shout out!
]]>
1. Prepare your face: Before you begin, wash your face with warm water and face soap to remove dirt and oil build up, and open the pores. To soften the hair and protect the skin apply a pre-shave oil. These first steps will ensure a smoother, more comfortable shave.
2. Soak your shaving brush: Fill a bowl or cup with warm water and submerge your shaving brush for about a minute. This softens the bristles and helps the brush to retain water, which is essential for creating a rich lather.
3. Wet the soap: While your brush is soaking, sprinkle some warm water on the soap of shaving soap to soften its surface. You can do this by dripping water from your fingertips. Start off slow, you can always add more water but you can’t take any away.
4. Load the brush: Remove the brush from the water and gently squeeze out the excess. Hold the soap in one hand or place it in a shaving mug, then swirl the brush on the soap in a circular motion for about 20-30 seconds. The goal is to load the brush with soap, forming a paste-like consistency.
5. Build the lather: There are multiple methods to build the lather but the concept is the same - face lathering and bowl lathering are the most common however, you can also build up a lather on the soap.
6. Apply the lather: Using the brush, apply the lather to your face in circular motions, ensuring even coverage on all sides of the hair. This will help lift and soften the hairs, making them easier to cut.
7. Shave: With a sharp razor, shave in the direction of hair growth (with the grain) using short, light strokes. Rinse the razor frequently to remove soap and hair buildup.
8. Rinse and repeat (if needed): Rinse your face with warm water to remove any remaining lather and hair. If you desire a closer shave, re-lather and shave again, this time going across or against the grain.
9. Rinse and finish: Rinse your face thoroughly with cold water to close the pores and pat dry with a clean towel. Apply your aftershave splash and balm to tone, soothe and moisturize your skin.
10. Clean up: Rinse your brush and soap under running water to remove any remaining lather. Shake the excess water from the brush and stand it up to dry, this will ensure that the bristles stay in shape and last a long time. Store the soap in a well-ventilated area, allowing it to dry completely before closing any container or lid.
By following these steps, you'll achieve a comfortable and close shave while enjoying the rich lather and pleasant scent of a Wet Shaving Products shaving soap.
We are always hearing about new and unique ways our customers are using their WSP products to work for them! In this section we will regularly update with new ideas, tips, tricks and hacks that we come across.
If you have a unique way you use shaving soap email or message us on any of our social media platforms and we will add it to the list with a shout out!
]]>Beard balm is an essential grooming product for any man sporting facial hair. Developed in the 21st century as beards regained popularity, this versatile product serves to condition, style, and promote the health of your beard. With its nourishing and styling benefits, beard balm is a must-have for maintaining a well-groomed beard.
1. Prep your beard: Begin by washing your beard with a gentle beard shampoo or soap to remove any dirt, debris, or excess oil. After patting it dry and leaving it slightly damp, apply beard oil to condition and hydrate your beard.
2. Scoop out the balm: Using the back of your thumbnail or a small spatula, scoop out a small amount of beard balm, about the size of a pea or a dime. You may need to adjust the amount depending on the length and thickness of your beard.
3. Warm the balm: Rub the balm in your hands to warm and melt the balm. This will transform the balm into a more spreadable consistency, making it easier to apply.
4. Apply the balm to your beard: Gently stroke the balm into your beard, starting at the base of the hairs near your skin and working your way down to the tips. Be sure to cover all areas of your beard, focusing on any particularly dry or unruly spots.
5. Distribute the balm evenly: Use a beard comb or brush to evenly distribute the balm throughout your beard. This will help ensure that all the hairs receive the nourishing benefits of the balm and help to detangle your beard.
6. Reapply as needed: Depending on your beard's needs and the climate you live in, you may need to re-apply beard balm throughout the day. Start with a smaller amount and adjust as necessary to maintain a healthy, well-groomed beard.
By following these steps, you can effectively use beard balm to moisturize, condition, and style your beard for a polished and well-maintained look.
We are always hearing about new and unique ways our customers are using their WSP products to work for them! In this section we will regularly update with new ideas, tips, tricks and hacks that we come across.
If you have a unique way that you use shaving cream email or message us on any of our social media platforms and we will add it to the list with a shout out!
]]>Shampoo bars are a fantastic, eco-friendly alternative to traditional liquid shampoos. Tracing their roots back to before the invention of liquid shampoos, they've seen a recent resurgence thanks to their minimal packaging, natural ingredients, and impressive longevity. The solid form of these bars, without excess water content, often allows them to last longer than their liquid counterparts. They're designed to cleanse and nourish your hair and scalp without stripping away natural oils.
1. Wet your facial hair or short hair: Begin by thoroughly wetting your facial hair or the short hair on your head with lukewarm water. The water will help activate the shampoo bar and make it easier to lather.
2. Lather the shampoo bar: Hold the shampoo bar in your hands and gently rub it between your palms to create a lather. Alternatively, you can glide the bar directly over your facial hair or short hair on your head, using a circular motion to produce a lather.
3. Apply the lather to your hair: Once you've generated a sufficient amount of lather, use your hands to massage it into your facial hair or short hair. Focus on the hair roots and skin, as this is where dirt and excess oil tend to accumulate.
4. Massage your hair and skin: Use your fingertips to gently massage the lather into your hair and skin, using circular motions to stimulate blood flow and ensure a deep clean. Spend a few minutes massaging the lather in to make sure all areas are covered.
5. Rinse thoroughly: Rinse your facial hair or short hair with lukewarm water, making sure to remove all traces of the shampoo bar lather. You may need to rinse several times to ensure that no residue remains.
6. Gently dry your hair: Pat your facial hair or short hair dry with a clean towel, being careful not to rub or tug the hair too harshly. Rubbing can cause frizz and damage, while gentle patting will help maintain the hair's health and appearance.
7. Follow up with conditioner (short hair): If desired, you can follow up with a conditioner. This can help to further nourish, soften, and detangle your hair.
8. Follow up for facial hair: Once your facial hair has dried you can follow-up with beard oil and beard balm to help moisturize and condition the hair and the skin beneath it.
By following these steps, you can effectively use a shampoo bar to cleanse and maintain the health of your facial hair or short hair on your head.
We are always hearing about new and unique ways our customers are using their WSP products to work for them! In this section we will regularly update with new ideas, tips, tricks and hacks that we come across.
If you have a unique way that you use shaving cream email or message us on any of our social media platforms and we will add it to the list with a shout out!
]]>
2. Dry your beard: Pat your beard dry with a clean towel, leaving it slightly damp. A slightly damp beard will help the beard oil spread more easily and absorb better into the hair and skin.
3. Shake the beard oil bottle: Before using the beard oil, give the bottle a good shake to ensure that the ingredients are mixed properly.
4. Dispense the beard oil: Shake a few drops of beard oil into the palm of your hand. The amount needed will depend on the length and thickness of your beard. Start with a smaller amount (3-4 drops) for a shorter beard and adjust as needed for longer or thicker beards.
5. Rub the oil between your palms: Gently rub your hands together to warm up the oil and spread it evenly across your palms and fingertips.
6. Work the oil into your beard: Start by massaging the oil into the skin underneath your beard to moisturize and nourish the skin. Then, work your way through the beard, ensuring that you cover all the hairs from root to tip. Use your fingertips to massage the oil into the hair and skin, reaching every area of your beard.
7. Repeat as needed: Depending on your beard's needs and the climate you live in, you may need to apply beard oil daily or every other day to maintain a healthy, well-conditioned beard. Adjust the frequency of application and the amount of oil used based on how your beard looks and feels.
By following these steps, you can effectively use beard oil to moisturize, condition, and maintain the health and appearance of your beard.
We are always hearing about new and unique ways our customers are using their WSP products to work for them! In this section we will regularly update with new ideas, tips, tricks and hacks that we come across.
If you have a unique way that you use shaving cream email or message us on any of our social media platforms and we will add it to the list with a shout out!
]]>Hair clay and hair paste are two distinct yet versatile products in the world of hair styling. Hair clay, provides a strong hold and matte finish, making it perfect for achieving a structured, natural-looking style. On the other hand, hair paste offers a less intense hold, allowing for more flexibility and re-styling throughout the day, with a typically softer and more natural finish. Whether you're seeking a firm, sculpted look or a casual, tousled style, hair clay and paste offer effective solutions to meet your needs.
1. Scoop out the product: Using the back of your thumbnail, remove a pea-sized amount of hair clay or paste and place it in the palm of your hand. Adjust the amount based on the length and thickness of your hair.
2. Melt the product: Rub your palms together to warm and melt the clay or paste, transforming it into a more spreadable and manageable consistency.
3. Apply to damp or dry hair: Depending on your desired finish, apply the product to damp hair for a wet-look finish or to dry hair for a natural look with less definition. Remember that hair paste will have a less strong hold compared to hair clay.
4. Work the product into your hair: Use your fingertips to distribute the clay or paste evenly throughout your hair, focusing on the areas where you want the most hold and definition. Make sure to work the product from the roots to the tips for a consistent application.
5. Style your hair: Shape your hair into the desired style using your fingertips, adding more clay or paste if needed for increased hold and control. Keep in mind that hair paste will provide a more flexible hold, while hair clay offers a stronger hold.
6. Use a comb for a polished look (optional): For a combed-through, finished look, use a comb to gently brush your hair into place. This can help to distribute the product more evenly and create a more polished appearance.
By following these steps, you can effectively use hair clay or paste to style your hair, achieving a wide range of looks from natural and casual to more defined and structured styles. Keep in mind that the paste will have a less strong hold compared to the clay.
We are always hearing about new and unique ways our customers are using their WSP products to work for them! In this section we will regularly update with new ideas, tips, tricks and hacks that we come across.
If you have a unique way that you use shaving cream email or message us on any of our social media platforms and we will add it to the list with a shout out!
]]>By following these tips, you can effectively store your hand & body soap bars, maintaining their quality and ensuring that they last as long as possible.
We are always hearing about new and unique ways our customers are using their WSP products to work for them! In this section we will regularly update with new ideas, tips, tricks and hacks that we come across.
If you have a unique way that you use shaving cream email or message us on any of our social media platforms and we will add it to the list with a shout out!
]]>